Planet PL-IGS-501T 5 Port 10/100/1000T Gigbit Endüstriyel Ethernet Switch

Endüstriyel Tip Yönetilemeyen Switch (Industrial Unmanaged Switch)
5-Port 10/100/1000T
IP30, -40~75 Derece C  

Physical Port

• 5-port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function

Layer 2 Features

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard
• Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
• High performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• Backplane (switching fabric): 10Gbps
• Integrated address look-up engine, supporting 2K absolute MAC addresses
• 1M bits on-chip buffer memory
• 9K Jumbo packet size support
• Automatic address learning and address aging
• CSMA/CD Protocol

Industrial Case / Installation

• IP30 metal case
• DIN rail and wall-mount design
• 12 to 48V DC, redundant power with polarity reverse protect function and connective, removable terminal block for master and slave power; 24V AC power support
• Supports EFT protection 6000V DC for power line
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

 
 

Hardware Specifications
Hardware Version	3
Copper Ports	5 x 10/100/1000Base-T RJ45 TP auto-MDI/MDI-X, auto-negotiation
Connector	Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm	Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V
LED	3 x LED for system and power: ?? Green: DC Power 1 ?? Green: DC Power 2 ?? Green: Power Fault 2 x LED for each copper port ?? Green: 1000Mbps LNK/ACT ?? Orange:10/100Mbps LNK/ACT
ESD Protection	6KV
EFT Protection	6KV
Power Requirements	12~48V DC, Redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation	4.8 watts / 16BTU (48V DC) 8.3 watts / 28BTU (24V DC)
Installation	DIN rail kit and wall-mount ear
Enclosure	IP30 metal case
Dimensions (W x D x H)	135 x 87 x 32 mm
Weight	498g
Switch Specifications
Switch Processing Scheme	Store-and-Forward
Address Table	2K entries
Buffer Memory	1M bits on-chip buffer memory
Flow Control	Back pressure for half duplex IEEE 802.3x pause frame for full duplex
Switch Fabric	10Gbps
Throughput (packet per second)	7.4Mpps @64bytes
Jumbo Frame	9K
Network Cables	10/100/1000Base-T Cat. 3, 4, 5, 5e, 6 UTP cable [100 meters (max.)] EIA/TIA-568 100-ohm STP [100 meters (max.)]
Standards Conformance
Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x full-duplex flow control
Regulation Compliance	FCC Part 15 Class A, CE
Stability Testing	IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration)
Environment
Temperature	Operating: -40~75 degrees C Storage: -40~75 degrees C
Humidity	Operating: 5~90% Storage: 5~90% (non-condensing)