| Hardware specifications |
|---|
| Standards | IEEE802.3,IEEE802.3u,IEEE802.3ab,IEEE802.3ad,IEEE802.3z,IEEE802.3x,IEEE802.1p,IEEE802.1q,IEEE802.1w,IEEE802.1d,IEEE802.1s,IEEE802.3af/at |
| LED indicators | One Link/Act or PoE LED indicator for each port
One Link/One Link/Act mode converting LED indicator for each device
One PoE mode converting LED indicator for each device
One PoE Max LED indicator for each device
One Power LED indicator for each device
One SYS LED indicator for each device |
| Interfaces | 24 x 10/100/1000 Base-T Ethernet ports (Data/Power)
4 x 1000 Base-X SFP ports (Data) |
| Lightning protection | Port: 6kV
Power: 6kV |
| Forwarding mode | Store-and-forward |
| Switching capability | 56Gbps |
| Packet forwarding rate | 41.7Mpps |
| Buffer | 12Mbit |
| MAC address table | 16K |
| PoE power supply | Ports 1 to 24 support IEEE 802.3af/at standard PoE power supply1 2 4 5 +, and 3 6 7 8 - |
| Whole switch consumption | Whole switch consumption: <410W
Maximum PoE output power: 370 W |
| Input voltage | AC?100-240V? 50/60Hz |
| Dimensions | 440 mm x 284 mm x 44 mm(L*W*H) |
| Operating environment | Operating temperature: 0°C - 45?
Storage temperature: -40°C - 70°C
Operating humidity: (10% - 90%)RH, non-condensing
Storage humidity: (5% - 90%)RH, non-condensing |
| Certificates | CCC?FCC?CE?RoHS |
| Software specifications |
|---|
| PoE power supply management | Supports port PoE configuration and power supply with priority
Supports PoE over-temperature protection
Supports PoE scheduled management
Supports intelligent and graphical management and PoE-powered device detection (port status, power assignment and PoE-powered device status) |
| Security features | Supports ARP receiving limit
Supports unknown MAC address discard
Supports DoS attack defense
Supports 802.1x security authentication
Supports Radius authentication |
| VLAN | Supports IEEE 802.1Q VLAN
Supports VLAN Layer-3 interfaces
Supports three port modes: Access, Trunk and Hybrid |
| DHCP | Supports DHCP Relay
Supports DHCP Snooping
Supports Option 82 policy configuration |
| L3 Routing | Supports VLAN-based routing
Supports IPv4 static routing
Supports static ARP |
| Port aggregation | Supports static aggregation
Supports LACP dynamic aggregation |
| Spanning tree | Supports IEEE 802.1d STP (Spanning Tree Protocol)
Supports IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
Supports IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
Supports edge port
Supports BPDU statistics |
| Multicast | Supports IGMP Snooping V1/V2/V3
Supports port fast leave |
| Port Mirroring | Supports N: 1 port mirroring |
| QoS | Supports SP (Strict Priority)
Supports SWRR (Simple Weighted Round Robin)
Support WRR (Weighted Round Robin)
Supports 802.1p port trust mode
Supports DSCP port trust mode
Supports a maximum of 8 queue service quality mapping |
| ACL | Supports MAC ACL
Supports IP ACL |
| Loading and upgrade | Supports FTP/TFTP/HTTP upgrade
Supports configuration import and export |
