^{Aten CS1953 3 Port USB Type C Display Port Hybrid KVMP Switch}

• One USB keyboard, mouse and one DisplayPort monitor control two DisplayPort computers, one USB-C device and share two USB peripherals
• Supports superior video quality – up to 4K DCI (4096 x 2160 @ 60Hz)
• Provides USB Power Delivery 3.0 for USB-C device charging up to 45W¹
• Computer selection via pushbuttons, hotkeys, mouse², and remote port selector
• Built-in 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
• Supports DisplayPort Alternate Mode (DP Alt Mode) which enables the USB connection to carry DisplayPort signals
• Independent switching of KVM, USB peripheral, and audio focus³
• DisplayPort 1.2 compliant; HDCP 1.4 compliant
• Supports HD Audio³
• Supports DisplayPort Dual-Mode technology (DP++)⁴
• Firmware upgradeable
• Bus-powered⁵
  
  Note:
  1. An additional power adapter is needed on the CS1953 for USB-C device charging to work.
  2. Mouse port switching is only supported under mouse emulation mode with a USB 3-button mouse wheel.
  3. HD audio through DisplayPort channel cannot be switched independently.
  4. DisplayPort Dual-Mode technology (DP++) does not require an active adapter for most single display setups. Active DisplayPort adapters are recommended if you are unsure of the video source’s DP++ compatibility.
  5. The unit can be bus-powered by the connected KVM sources via USB ports.

• 1x CS1953 3-Port USB-C DisplayPort Hybrid KVMP™ Switch
• 2x DisplayPort 1.2 Cables
• 2x USB 3.0 Type-A to Type-B Cables
• 1x USB-C Cable
• 3x Audio Cables
• 1x Remote Port Selector
• 1x User Instructions
• 1x Power Adapter*
• Note: *The CS1953 is provided in two packages; one package contains a power adapter, the other does not.